Kawasaki Jet ski performance, Repair &  Maintenance 

Kawi performance

$26.95

$253.95/ Kit

$164.99

$159.99

Solas               $26.95 ea.

Type your paragraph here.

Kawasaki Ultra 250X 260X 300X 310X Helicoils

(Broken a bolt? Easy fix! Fits all ultra models. Will repair all threads with a high strength stainless helicoil. Comes with everything you need besides a drill bit. Stainless heli-coils, tap and driver.)

KP ALU Insert    $32.50 ea.

Kawasaki Ultra 250X 260X Flywheel Puller

(Will help remove the flywheel off the tapered crankshaft, most of the time the flywheel is extremely tight and this kit will be a necessity to remove the flywheel. Not needed for Ultra 300/310 flywheels, since they are splined instead of tapered. May be needed on rare instances with newer models.)

Kawasaki Ultra 250X 260X 300X 310X 15f LX SXR Impeller Spline Tool

  $15.25 ea.

Kawasaki Shim Kit

(Covers all the usable ranges you need to shim your machine. If it is outside of this range, there typically is a problem. Comes with 5 shims per size.)

Generic            $14.95 ea.

$48.00

Kawasaki Ultra 250 260 300 310 15F 12F SXR 1500 Spark Plug Thread Repair Kits

(These are premium quality thread repair kits that will fix damaged or corroded spark plug threads. KP recommends this done with the head off, but these kits are made to work with the head on. But all material must be removed from the chamber. Use the standard kit for broken plugs after they are removed. Use the oversize kit for threads that have already been helicoiled. KP highly recommends using the High Strength SS inserts exclusively made for Kawasaki watercraft. Inserts that come with these kits will rust and do not extend far enough to the end of the hole. KP has re-engineered these to be a perfect fit, high strength, corrosion resistant, and designed to remove as much heat from the plug as possible. Oversize inserts are made of high strength aircraft aluminum.)

Kawasaki Ultra 250 260 300 310 M8 Thread Repair Kit

(This kit is made for repair of all M8 threads, includes a high Quality HHS Tap and Cobalt bit. Will repair miscellaneous threads.)

$31.00

Kawasaki Ultra 250X 260X 300X 310X 15F SXR 1500 Output Shaft Socket

(Will allow you to remove output shaft from the flywheel. Can be used with an impact gun, but recommended use with flywheel holder.)

$125.00

Oversize Thread Repair 

(For helicoiled threads ONLY!)

$190.94

$93.60

Kawasaki Ultra 250X 260X 300X 310X TDC Finder

(Fits all ultra models)

$112.30/ Kit

$44.00

$203.19

M6    $52.00/KIT

M8   $43.90/KIT

M10 Fine   $77.00

M6    $9.00/EA.

M8   $24.00/EA.

M10 Fine   $31.00/EA.

M10 Coarse      $31.00/EA

Oversize Thread Repair Kit 

(Does not come with SS inserts below)

Kawasaki Ultra 300X 310X Coupler Removal Set

(Will allow you to remove crankshaft coupler easily without damaging any engine components or having to cut coupler off. Machined to fit supplied socket.)

Kawasaki Ultra 250 260 300 310 15F SXR 1500 Cooling System Tap

(OEM cooling system barbs are very short and undersized for the hose they are used with. This tap is able to clean up those threads if damaged, and also install higher quality barbs, that actually fit the hose quite snug.)

Kawasaki Ultra 250X 260X 300X 310X Threaded Inserts

(High strength threaded insert for rotten or corroded threads. Never needs repair again! Fits all ultra model. Highest quality thread repair on the market! All stainless. Comes with insert only, tap is required separately. M10 fine is for all threads on the engine and jet pump. Coarse is for motor mounts only.)

Kawasaki Ultra 250X 260X 300X 310X 15f LX SXR Valve Spring Compressor

(Easy to use and remove valves or install springs with the head off)

Kawasaki Ultra 250 260 300 310 M10 Thread Repair Kit

(This kit is made for repair of all M10 fine threads, includes a high Quality HHS Tap and Cobalt bit. Will repair all supercharger mount bolts.)

Kawasaki Ultra 250 260 300 310 15F 12F SXR 1500 Spark Plug Thread Repair

(This is a premium quality thread repair tap that will fix damaged or corroded spark plug threads. KP recommends this done with the head off.)

Kawasaki Ultra 250X 260X 300X 310X 15F SXR 1500 Flywheel Holder

(This tool will allow you to remove the output shaft with out damaging the engine. This is also a necessity for tightening the output shaft back to spec.)

KP SS Insert    $24.50 ea.

Kawasaki Ultra 250 260 300 310 M6 Thread Repair Kit

(This kit is made for repair of all M6 threads, includes a high Quality HHS Tap and Cobalt bit. Will repair all valve cover threads, cam bolts and more!)

$34.00

Kawasaki Ultra 250 260 15F LX SXR 1500 Coupler Removal Tool

(Will allow you to remove crankshaft coupler easily without damaging any engine components or having to cut coupler off.)

Standard Thread Repair Kit 

(Does not come with SS inserts to right)

Standard Thread Repair

$298.95

$45.00

Kawasaki Ultra 250X 260X 300X 310X 15F LX SXR Steering Linkage Tool

(Will easily remove the brass nut on both the steering cable and reverse lever cable. Easy access so you do not need to remove much from the rear of your ski. Has a 1/2" drive and is 16" long for ease.)

Kawasaki Ultra 250X 260X 300X 310X Tools