Kawasaki Ultra 250x and 260x Supercharger Parts and Services

Kawasaki Jet ski performance, Repair & Maintenance

Kawi performance

$156.00

Click for detailed specs!

KP Steel Pulley OEM

Kawasaki Ultra 250x 260x Supercharger Belt OEM

$1,899.99

$56.00 ea.

KP Stealth Series Superboost Pulley Belt

(Specifically made to fit the superboost pulley)

Ultra 250x 260x Pulley and Damper

(OEM comes complete as a set with a new pulley and damper. Refirbished only comes individually. They are blasted, and coated with a marine paint that lasts much longer thank Kawasaki's plating. Refirbished pulleys come with KP premium bearing installed.)

$5.44 ea.

$42.00 ea.

$300.00 ea.

MADE IN U.S.A

**THIS WILL PREVENT SUPERCHARGER FAILURE!**

(Your supercharger should be fogged after every use to prevent buildup and corrosion on the supercharger internals, which ultimately causes loss of power and eventually a blown charger. Here at Kawi Performance we have an aftermarket kit that will allow you to easily fog your supercharger while you are flushing the engine. We recommend installing the port just above the seat bracket. Made of completely rugged Stainless steel and PTFE. When you are ready to fog, the cap screws off and is attached by a chain to prevent it falling into the water. This kit requires some basic hole drilling and tapping for threads on supercharger intake duct. If you rather us tap the hole in your intake duct, we would provide this service for free with purchase of a kit. Comes with clear installation instructions with pictures!)

Refurbished Pulley $175

Call for availability

Kawasaki Ultra 250/260 To N/A Conversion Kit

(No motor work required! All bolt on parts included in this kit. This will convert your Ultra 250 or 260 into a Naturally Aspirated machine. No more hassle, no more problems, you can finally sell your superchargers and intercoolers! This comes with everything you need for this conversion, including tools. All you need to do is ship us your ECU, so that we can remap the ECU to our N/A Conversion Map. We have developed this map specifically for this conversion. Max speed after conversion is about 50 MPH. Any questions please contact us!)

$300.00 ea.

Refurbished Damper $225.00

Call for availability

Stainless Pulley $150.00 ea.

OEM

KP SS Pulley

OE 377.39

Fits all OEM or Aftermarket pulleys!!

Kawasaki Ultra 250x 260x Supercharger Gaskets

OEM (Steel) $10.45 ea.

KP 304 Stainless Steel $15.00 ea

Supercharger RPM vs Engine RPM Using Below Pulleys

$415.39

Kawasaki Ultra 250x 260x OEM Supercharger Hub $149.48 ea.

Pulley Shim

(Needed for R&D hubs Only)

NEW OEM $681.63

$15.95 ea.

OEM Pulley $111.94 ea.

Kawasaki Ultra 250x 260x Supercharger Fogging Port

Kawasaki Ultra 250x 260x Lightweight Aluminum Supercharger Pulley

With SS Upgrade

$275.00

Kawasaki Ultra 250x 260x Supercharger Stainless Steel Mount Bolt Upgrade With KP Racing Pulley:

(For extreme conditions where salt spray or acidic water may splash on the supercharger. This replaces the 4 steel mount bolts with stainless, 2 on the front, 2 on the side, 2 tensioner mount bolts, pulley bolt and KP SS Pulley.)

Ultra 300 Steel Pulley $38.00 ea.

Ultra 250x 260x Supercharger Tensioner Pulley

(Below are the options we offer, stock is the aluminum pulley that comes with the machine. We install our precision idler bearings with stock pulleys. Both of the KP pulleys below are much lighter than stock, thus reducing belt wear and spool time. They are slightly bigger than stock as well, which puts more even pressure on the belt for even more extended life. Stainless bearing comes standard with the SS pulley, the steel pulley comes with steel unless you would like ss.)

$350.32

Comes With:

1 NEW Pulley Bearing

1 NEW Tensioner Bearing

2 NEW Main Supercharger Bearings

1 NEW Supercharger Oil

1 Marine Grease Packet

1 Stainless Steel Bolt Set

1 Can Fogging Oil

1 NEW Supercharger Fogging Port

Kawasaki Ultra 250x 260x Supercharger Rebuild Kit

Kawasaki Ultra 250x 260x OEM Tensioner

(New OEM supercharger tensioner. For used tensioners please call us for availability. Please specify KP pulley or OEM upon checkout.)

$26.49

Kawasaki Ultra 250x 260x Premium Supercharger Oil

(Better quality than Kawasaki OEM Supercharger oil. This is the oil Eaton uses in their TVS Superchargers. This bottle contains the exact amount you need for your charger.)

Kawasaki Ultra 250x 260x Supercharger Parts

$75.00

Kawasaki Ultra 250x 260x Supercharger Stainless Steel Mount Bolt Upgrade:

$35.00

Kawasaki Ultra 250x 260x Supercharger Stainless Steel Bolt Upgrade:

(For extreme conditions where salt spray or acidic water may splash on the supercharger. This replaces all the steel bolts with stainless, which will take much more of a beating in these extreme conditions.)

$35.00 ea.

Ultra 250x 260x Precision Supercharger Tensioner Pulley Bearing

(High precision replacement bearing for a stock tensioner. Much higher quality and precision than OEM bearing.)

KP Stealth Series Super-Lightweight Billet OE Pulley Replacement

(Direct replacement for stock pulley. Extremely quick spool time and Black Hard

Coated for optimum belt life and performance. Pulley is Engineered for high strength

and lightest possible design. Pulley weighs 1 pound. Requires shims for use with RD
aftermarket hub ONLY, please see below.

KP Stealth Series Super-Lightweight Performance Pulley (+1-2 PSI)

(Direct replacement for OEM pulley with a little more "Kick". Super light and black Hard Coated.

Pulley is made for more aggressive acceleration and increase in top end. KP recommends adding fuel.)

Kawasaki Ultra 250x 260x High Strength Supercharger Hub KP $109.99 ea.

Kawasaki Ultra 250x 260x EXTREME Performance Pulley Bearing $50.00 ea.

(Redesigned exclusively for the Ultra 250's and 260's. After extensive testing, we have designed this bearing

to last 3x longer, be reliable in much more extreme conditions, and prevent water intrusion more so than before.

Leave it to KP to only offer the best!)

Kawasaki Ultra 250x 260x High Performance Supercharger Bearing $35.00 ea.